| Brand | GTX |
| Model number | 4 Inch |
| Type | Dry |
| Weight | 1 pcs/0.100kg |
| Place of origin | Mide In China |
| Material | Tungsten steel carbon alloy |
| Hole diameter | 20mm |
| Grit Type | Slices, ceramic tiles, rock slabs, glass compounds |
| Thickness | 1.3mm |
| Product unit | 1 Set/4Pcs+1Pcs(free) |
About this item
When using a Dry Ultra-thin Rock Slab Ceramic Tile Glass Tile Diamond Saw Blade with an angle grinder, follow these steps and safety measures to ensure effective cutting and prolong the blade’s lifespan:
Equipment Preparation
- Select the Right Angle Grinder: Ensure the angle grinder’s power and speed are suitable for the blade specifications.
- Inspect the Blade: Check the blade for any damage or deformation before installation. Do not use damaged blades.
- Install the Blade: Follow the angle grinder’s manual to properly install the blade, making sure it is securely fastened and aligned correctly.
Operating Steps
- Prepare the Material: Secure the rock slab, ceramic tile, or glass tile firmly on a stable workbench to prevent movement.
- Mark the Cutting Line: Use a ruler and marker to draw the cutting line on the material for accurate cutting.
- Set Up the Angle Grinder: Ensure the angle grinder is off and plugged into a power source.
- Wear Protective Gear: Always wear safety goggles, gloves, and a dust mask for protection.
Cutting Procedure
- Start the Angle Grinder: Hold the angle grinder firmly, switch it on, and allow the blade to reach full speed.
- Begin Cutting:
– Gradually bring the blade into contact with the material, following the marked line slowly.
– Maintain even pressure without forcing the blade to avoid damage to the blade or material.
– Keep the angle grinder and material stable to minimize vibration.
- Cooling: Although it’s a dry-cut blade, proper cooling can extend its life and improve cutting efficiency. Use a small amount of water for lubrication and cooling if the grinder and blade specifications allow.
Precautions
- Cutting Speed: Maintain a consistent cutting speed, avoiding sudden acceleration or deceleration.
- Cooling Breaks: Take occasional breaks during long cuts to let the blade cool down.
- Avoid Forcing the Cut: If you encounter resistance or the material is too hard, stop and inspect both the blade and material.
- Finishing the Cut: Once the cut is complete, turn off the angle grinder before removing the material to avoid injury from the spinning blade.
Maintenance and Care
- Clean the Blade: After use, clean the blade to remove debris and dust.
- Storage: Store the blade in a dry place to prevent rust and corrosion.
- Regular Inspection: Regularly check the blade for wear and tear and replace it as needed to ensure optimal cutting performance.
Safety Tips
– Two-Hand Operation: Always use both hands to hold the angle grinder for better control.
– Keep the Work Area Clean: Ensure the work area is clean and free of obstacles to prevent slips and falls.
– Cutting Direction: Ensure the cutting direction matches the arrow on the blade to avoid kickback.
By following these steps and precautions, you can safely and efficiently use a Dry Ultra-thin Rock Slab Ceramic Tile Glass Tile Saw Blade with an angle grinder for your cutting tasks.
Product Details Show
Three-Heads Bush Hammer Plate for Stone and Concrete-M14
1 × $384.99 
Metal Bonded Diamond Grinding Disc Wheel for Granite Marble Stone 1set/8PCS
2 × $78.99 
Disc Fickert Head For The Line Polishing Machine HengLong version
1 × $55.00 
Thin dry saw blade for angle grinder-1Pcs Purple
1 × $2.37 
John Doe –
“Recientemente compré las hojas de sierra ultra delgadas para losas de roca, cerámica y vidrio para mi amoladora angular, y estoy muy impresionado. Las hojas cortan azulejos de cerámica y vidrio como si nada, dejando un borde limpio y preciso. El hecho de que obtienes una hoja extra gratis es una gran ventaja. Esto es imprescindible para cualquiera que trabaje con azulejos.”
John Doe –
Anna Kowalsky –
“I recently purchased the Dry Ultra-thin rock slab ceramic tile glass tile saw blade for my angle grinder and I’m very impressed. The blades cut through ceramic and glass tiles like butter, leaving a clean and precise edge. The fact that you get an extra blade for free is a great bonus. This is a must-have for anyone working with tiles.”
Anna Kowalsky –
Peter Wargner –
Sed id tincidunt sapien. Pellentesque cursus accumsan tellus, nec ultricies nulla sollicitudin eget. Donec feugiat orci vestibulum porttitor sagittis.
Peter Wargner –